Products

KDI Three Phase Monobloc Pumps

HHN/HHF 15 CM HIGH HEAD WATER FILLED SUBMERSIBLE PUMPS

High Efficiency and Energy Saving Design lnnovative design manufactured at state of art plant, delivers optimum efficiency at lower energy consumption resulting in significant cost savings. Easy Maintainable Designs Easy maintainable design and better interchangeability of components so that pump can be serviced even at remote locations by semi-skilled technicians. Robust Construction Heavy duty construction made from graded cast iron, carbon + silicon carbide mechanical seal makes the pump suitable for sewage and sludge. Replaceable Wearing Parts All wearing parts within the pumps are easily accessible and replaceable which facilitates ease of maintenance thereby extending the life of the pump. Dynamically Balanced Rotating Parts Minimum vibrations protect components from damages during the operations, thus ensuring consistent performance as concentricity is maintained.

TIS / TISO / TISF-k series of pump is single-stage centrifugal pump and features axial suction and radial discharge; the pump body is fixed by base. Pump has back pull out design which facilitates easy servicing without disturbing the pump body and piping. Impeller is with optimum design; large inlet avoids whirlpool; low NPSH pump; works stably with very less noise. End Suction Centrifugal Pump back-pull-out design Sturdy structure with low noise Easy to maintain and long service time

Light weight and sturdy structure Energy efficient . Pump design according to DIN24255, All the parts contact with liquid made of stainless steel with high efficiency. Standard TEFC IEC B35 motor driven, single phase up to 2.2kw. Max. working pressure 10 bar.

Horizontal multi stage pumps has compact design, low-noise and long service life, Easy to install and operate energy efficient Horizontal multistage design with stainless steel stamped-welded impeller and diffuser. Pumps are supplied with single phase or three phase motors. Single phase motor is available up to 2.2 kW. Motors are IE 2, Class F and IP55 as a standard. Standard supply for liquid temperature up to 700, high temperature pumps are available on request. 60 Hz pumps are also available on request, please confirm performance curve before selection.

Horizontal Multi Stage Pumps have compact design, low-noise and long service life. They are easy to install and operate. Energy efficient Horizontal Multistage design with stainless steel stamped-welded impeller and diffusers. Pumps are supplied with single phase or three phase motors. Single phase motor is available up to 2.2 kW. Motors are IE 2, Class F and IP55 as a standard. Standard supply for liquid temperature up to 70℃, high temperature pumps are available on request.

CDLF Series is a sheet metal Stainless Steel Vertical Multistage Centrifugal Pumps offered by TOSHIO. The pumps are driven by standard electrical face mounted motor up to 7.50 kW and flange mounted for ratings higher than 7.5 kW. CDLF Series Pumps are available in complete SS304 and SS316 material. Pumps are available in single Phase as well as three Phase.

TSM series is Self-priming Surface Non-clog Mud Pump is equipped with semi-open impeller. These Pumps are suitable for Sewage Transfer or Effluent Transfer Application. The Pumps are manufactured as per IS5120.

THO Series Horizontal Openwell Submersible Pump is used for rural and urban drinking water supply. This pump is used in High rise building for water supply. It is also used in Sprinkler Irrigation System for watering Lawns and gardens and for Drip Irrigation. Also used in Decorative fountains and waterfalls.

JA Series Submersible Jet Aerator has a unique design for gas mixture chamber which has large air intake quantity. Air can mix well with water and produce numerous minute air bubbles with high air dissolving rate. The pressure produced by impeller through jet hole produces forceful water flow, which realizes jet after mixed with air to make oxygen move efficiently in water and at the same time achieve good mixing effect, which can maintain the flow rate necessary for activated sludge floating. The unit is designed to run in water with low winding number and low noise: the overland air-intake duct can be additionally equipped with silencing equipment. Cost can be reduced since no other anechoic room is required. This Submersible Jet Aerator adopts specially designed Pump of Aeration, which forms the integral unit air bubble generating section and automatic attach device. This Special Aeration Pump uses high-performance impeller, which do not block fouls. Therefore, it has a long life. The Air Bubble Generating Section is composed of air-inlet duct, nozzle holder, gas mixture chamber and divergent pipe. Water is pumped into gas mixture chamber at high speed from nozzle holder connected to pump outlet. Air is inducted into gas mixture chamber through air-inlet duct and is mixed with water flow, then exhausted through divergent pipe. The Automatic Attach Device is an equipment composed of induction duct, directing plate, the attach unit. During maintenance of equipment, the pump can be directly pulled out from the water through induction duct along with the attached device. The Submersible Jet Aerator can be used as an Agitator in primary collection tank. It is the Most convenient and efficient product as compared to conventional blower-diffuser arrangement for Aeration in Sewage and Industrial Waste Water.

JKD Series is Submersible Dredging Pump which is suitable for Dredging Light Sludge from Building Basement, Hotel, Factory, Septic Tank and Cesspits Water. The Pump is fitted with Vortex Impeller and Agitator to prevent Clogging of the pump. It has Submersible Squirrel-cage Induction Motor with F class insulation and with motor protection Class IP68. The rotor and shaft are made of High Tensile Stainless Steel 410/420. Cable entry is designed with Anti-wicking Block at motor entry. Single Phase motor has thermal protection and Three phase motors are fitted with Overload protector. Top and bottom bearing are high quality Deep-groove C3 Type ball bearing. It has oil seal to give extra protection from the leakages of oil chamber.